张涵其，蒙特卡罗模拟器力学系博士后。本硕博均毕业于哈尔滨工业大学-航天学院-复合材料与结构研究所，曾受CSC资助赴比利时鲁汶大学联合培养。长期面向航空航天领域，开展极端环境下先进复合材料及其结构的成型与力学性能研究。此外，还关注聚合物的多尺度建模、仿真分析，以及动态润湿与界面行为。

2012.09-2016.06   哈尔滨工业大学，航天学院，复合材料与工程，工学学士学位

2016.09-2018.06   哈尔滨工业大学，航天学院，复合材料与结构研究所，材料工程，工学硕士学位

2018.09-2026.06   哈尔滨工业大学，航天学院，复合材料与结构研究所，力学学科，工学博士学位

2022.06-2023.09   比利时鲁汶大学，材料工程学院，材料工程，访问学者（CSC资助）

2026.01-至今.     四川大学，蒙特卡罗模拟器，博士后

1. 先进复合材料成型与力学性能

2. 聚合物多尺度建模与仿真计算

3. 聚合物动态润湿与界面行为

2025年

[1] Tan X H, Cheng Z F, Bian B, et al. Fine‐tuned perovskite hollow fiber reactor for efficient degradation of ciprofloxacin[J]. Rare Metals, 2025, 44(7): 4826-4838.

2024年

[2] Chen R, Li G, Hu J, et al. Self-Assembled Polydopamine for Enhanced Fracture Toughness of Carbon Nanofiber-Reinforced Phthalonitrile Composites[J]. ACS Applied Nano Materials, 2024, 7(20): 23474-23484.

[3] Chen R, Li G, Hu J, et al. Study the application of polydopamine preparation technology in the interface modification of phthalonitrile composite[J]. Composites Communications, 2024, 50: 102001.

[4] Li Q, Li P, Li Y, et al. Flexible molybdenum disulfide/carbon nanotube composite films for thermoelectric applications[J]. Energy Material Advances, 2024, 5: 0114.

[5] Zhang H, Ji C, Li G, et al. Towards post-curing parameters optimization of phthalonitrile composites through the synergy of experiment and machine learning[J]. Composites Science and Technology, 2024, 255: 110727.

[6] Yang J, Ji C, Wang D, et al. Fire behavior and post-fire residual tensile strength prediction of carbon fiber/phthalonitrile composite laminates[J]. Composites Science and Technology, 2024, 252: 110624.

[7] Wang D, Hu J, Zhao D, et al. Enhanced mechanical and thermal properties of phenolic-type phthalonitrile nanocomposites with fumed silica nanoparticles[J]. Polymer, 2024, 296: 126783.

[8] 张涵其,谭指,彭飞,等.耐高温树脂基复合材料研究进展及其在航空航天领域的应用[J].宇航材料工艺,2024,54(2):18-28.

2023年

[9] Zhao D, Hu J, Wang D, et al. Reinforcement of mica on phthalonitrile resin and composites: Curing, thermal, mechanical and dielectric properties[J]. Composites Science and Technology, 2023, 244: 110289.

[10]Xiao J, Zhang H, Gao X, et al. Insight into pyrolysis behavior of silicone-phenolic hybrid aerogel through thermal kinetic analysis and ReaxFF MD simulations[J]. Chemical Engineering Journal, 2023, 458: 141480.

[11]Zhang Y, Zhang H, Guo M, et al. Reactive spreading dynamics of molten polymer liquids[J]. Macromolecules, 2023, 56(3): 1111-1121.

2022年

[12]Chen R, Zhang J, Chen H, et al. Toughening mechanism of phthalonitrile polymer: MD simulation and experiment[J]. Composites Science and Technology, 2023, 232: 109841.

[13]Hu J, Zhang H, Li S, et al. Process parameter–mechanical property relationships and influence mechanism of advanced CFF/PEEK thermoplastic composites[J]. Polymer Composites, 2022, 43(8): 5119-5132.

2021年

[14]杨永生,韩明轩,陈国富,等.防弹混杂复合材料设计及其抗冲击性能研究[J].纤维复合材料,2021,38(4):33-41.

[15]杨永生,陈国富,曲艳双,等.酚醛树脂炭化改性碳纤维界面行为研究[J].纤维复合材料,2021,38(3):71-80.

2020年

[16]Zhang H, Wang B, Hu J, et al. Curing behavior studies of phenol-containing phthalonitrile monomer for advanced composite materials[J]. Thermochimica Acta, 2021, 696: 178837.

[17]Hu J, Liu A, Zhu S, et al. Novel panel-core connection process and impact behaviors of CF/PEEK thermoplastic composite sandwich structures with truss cores[J]. Composite Structures, 2020, 251: 112659.

[18]Hu J, Li F, Wang B, et al. A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: The liquid-phase oxidation followed by grafting of silane coupling agent[J]. Composites Part B: Engineering, 2020, 191: 107966.

[19]Zhang H, Wang B, Wang Y, et al. Novolac/phenol-containing phthalonitrile blends: curing characteristics and composite mechanical properties[J]. Polymers, 2020, 12(1): 126.

[20]胡记强,王兵,张涵其,等.热塑性复合材料构件的制备及其在航空航天领域的应用[J].宇航总体技术,2020,4(4):61-70.

[1]哈尔滨工业大学.一种爆炸螺栓盒及其制备方法:201710703074.5[P].2019-04-12.

[2]哈尔滨工业大学.一种改性酞腈树脂及其制备方法:202110891263.6[P].2023-05-09.